Solar module mounting structures (MMS) and components

Structures for ground-mount and rooftop projects, roll-formed and punched in-house to your drawings.

~500 MW

monthly capacity · among India’s larger solar-structure makers

roll-forming lines with inline punching

Up to 5 mm

roll-forming capability

ISO 9001

and ISO 14001 certified

Products

Everything for the structure, from one plant

Structures for utility-scale and open-access plants, cut and punched to drawing.

Elevated and low-rise structures for C&I rooftops, with base plates for RCC anchoring.

Hat, C/Z/U sections and slotted or plain strut channels.

Cleats, connectors and custom parts, plus inverter and ACSB stands.

Technical range

Thickness	0.8 – 5 mm
Yield strength	240 – 550 MPa
Hat section	Web 40–90 mm · height 60–120 mm
C section	Web 50–350 mm · flange 25–125 mm
Length	As per project · tolerance ±2 mm
Steel from	JSW · Tata Steel · AM/NS India · Jindal Steel

Finish	How it’s applied	Typically chosen for	Standard
Zinc-coated steel (pre-galvanized, GI)	Steel coil is zinc-coated at the mill, then formed into sections	Rooftops and mild environments	IS 277
Aluminium-zinc coated steel (Galvalume, GL)	Steel coil is coated with an aluminium-zinc alloy at the mill, then formed	Purlins and light members; moderate environments	IS 15961
Zinc-aluminium-magnesium coated steel (ZM, ZAM)	Steel coil is coated with a zinc, aluminium and magnesium alloy at the mill, then formed	Harsher sites, such as coastal or humid locations, where hot-dip galvanizing is not specified	IS 18513 · ISO 8353
Hot-dip galvanized steel (HDG)	Finished members are dipped in molten zinc after fabrication	Columns, rafters and utility-scale ground mounts; the heaviest protection	IS 4759 · ASTM A123